SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Changed engine, rewiring question
/cgi-bin/YaBB.pl?num=1651348012

Message started by TomasDK on 04/30/22 at 12:46:51

Title: Changed engine, rewiring question
Post by TomasDK on 04/30/22 at 12:46:51

Hi. Me and a biker buddy changed and rewired my bike.

The 'new' engine is a 1998 model and had different wiring than the old 1992 model.

We got almost everything connected exept the 2 in the picture. White and green, circled with red. We looked at the scematic, but could not figure out what those wires are for.

Bike is not assemled yet as we are not sure if it will fire up without these connected to something.

The donorbike was a crashed bike with a good engine. The old engine, a mechanic assembled incorrectly and it died. (It will be renovated later.


Title: Re: Changed engine, rewiring question
Post by verslagen1 on 04/30/22 at 18:12:48

the big green one is the ignition switch
little green is kick stand safety.
it won't start w/out either one.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.