SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> removing float bowl with carburetor on bike /cgi-bin/YaBB.pl?num=1639805439 Message started by ckahleer on 12/17/21 at 21:30:39 |
Title: removing float bowl with carburetor on bike Post by ckahleer on 12/17/21 at 21:30:39 My carburetor is off the bike now while waiting for parts. I may need to experment with different jets once I get it back on the bike. How hard is it to get to the main and pilot jets with the carburetor on the bike? |
Title: Re: removing float bowl with carburetor on bike Post by verslagen1 on 12/17/21 at 21:43:55 49414B42464F4F582A0 wrote:
Fairly easy, you just need to drop the bowl. Usually the bat box gets in the way, but a ratchet strap can pull it backwards and you'll have plenty of room. |
Title: Re: removing float bowl with carburetor on bike Post by Dave on 12/18/21 at 02:19:34 It becomes much easier if you replace the JIS screws with Allen headed socket screws. |
Title: Re: removing float bowl with carburetor on bike Post by justin_o_guy2 on 12/18/21 at 08:00:33 First time you probably need to have it on the bench. If you have to use a handheld impact be sure to back-up the part you are smacking on. Ditch the JIS heads. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |