SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Having trouble pulling the magneto root.
/cgi-bin/YaBB.pl?num=1639077601

Message started by QNero on 12/09/21 at 11:20:01

Title: Having trouble pulling the magneto root.
Post by QNero on 12/09/21 at 11:20:01

So, Im having issues with a pit-posse puller and was wondering if anyone has come across this issue with their puller?

Any ideas what I'm doing wrong here? I've gotta assume operator error on my part, but I could be wrong! At this point I'm really scratching my head because of the measurements, it should be working? :-?

Title: Re: Having trouble pulling the magneto root.
Post by QNero on 12/09/21 at 11:20:52

Same as above different photo.

Title: Re: Having trouble pulling the magneto root.
Post by QNero on 12/09/21 at 11:21:57

same as above diff photo

Title: Re: Having trouble pulling the magneto root.
Post by QNero on 12/09/21 at 11:22:53

different photo

Title: Re: Having trouble pulling the magneto root.
Post by QNero on 12/09/21 at 11:23:14

diff photo

Title: Re: Having trouble pulling the magneto root.
Post by verslagen1 on 12/09/21 at 11:55:31

Re-install the center bolt to take up the space.
Don't tighten it all the way, maybe leave a 1/4" gap.

Title: Re: Having trouble pulling the magneto root.
Post by Dave on 12/09/21 at 12:45:22

72617677686563616A35040 wrote:

Re-install the center bolt to take up the space.
Don't tighten it all the way, maybe leave a 1/4" gap.

Yep.....What Versy said!