SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Mid or Rear Control bracket? /cgi-bin/YaBB.pl?num=1629566740 Message started by SavageMan99 on 08/21/21 at 10:25:40 |
Title: Mid or Rear Control bracket? Post by SavageMan99 on 08/21/21 at 10:25:40 I'm looking for a set of brackets to fabricate a set of mid or controls. I can do the rest, but have no idea on the dimensions of the brackets. |
Title: Re: Mid or Rear Control bracket? Post by verslagen1 on 08/21/21 at 11:16:09 I believe the last guy made his own RYCA style brackets from the rear engine brackets. https://www.ebay.com/itm/200783909440?hash=item2ebfa75240:g:-lMAAOxymcdRhoHo |
Title: Re: Mid or Rear Control bracket? Post by Ruttly on 08/21/21 at 11:40:50 If you copy the Ryca bracket only tack weld the outer plates until you find a comfortable foot peg location. Raise or lower , mid or rearset , then final weld. I believe Ryca had 2 brackets , for belt & for chain conversion but both were for rearset position. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |