SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> How are the rear turn signal wires routed?
/cgi-bin/YaBB.pl?num=1629512120

Message started by JED on 08/20/21 at 19:15:19

Title: How are the rear turn signal wires routed?
Post by JED on 08/20/21 at 19:15:19

Thanks,

Just bought a 2000 savage and I’m going to buy rear turn signals (they’re missing).  

When installing, are the wires to routed through the chrome fender rails or inside the fender same as the brake light?

Thanks for your help!


Title: Re: How are the rear turn signal wires routed?
Post by verslagen1 on 08/20/21 at 22:54:27

they're routed under the rails, you'll find some clips stuck on the backside.
then they're routed between the frame and fender.

there might be some pictures in the savage companion.

Title: Re: How are the rear turn signal wires routed?
Post by JED on 08/21/21 at 08:22:58

Thanks.

On second glance, this is mentioned in the savage companion photos but doesn’t show it with detail.  

I can go from here.
Thanks again.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.