SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Rattlin' Header ? /cgi-bin/YaBB.pl?num=1629438134 Message started by zipidachimp on 08/19/21 at 22:42:14 |
Title: Rattlin' Header ? Post by zipidachimp on 08/19/21 at 22:42:14 Whenever I hit/tap my header it rattles like crazy. Sounds as if the inner pipe is loose but both ends are tight. Sure hate to replace it as I had it ceramic coated 3 years ago. Anyone else seen this? Cheers! 8-) |
Title: Re: Rattlin' Header ? Post by Dave on 08/20/21 at 08:21:54 Yes - One other member had the interior pipe disintegrate from the outer pipe. I wonder if the ceramic coating might have trapped too much heat and kept the inner pipe too hot. I have heard that wrapping pipes is not good for the durability of a single wall pipe. When the engine is run really hard the heat wrap can create a condition where the wrapped pipe is so hot it gets thermally challenged and can get almost molten......and ultimately it leads to the pipe getting weak and cracking. |
Title: Re: Rattlin' Header ? Post by Serowbot on 08/20/21 at 09:12:30 Humidity kills metal... Even here in AZ,.. the first Harley muff I put on went after 15k miles. I downshifted and shot the center baffle plate out the rear on an afterfire (saw it fly in my rearview mirror)... like a mini cannon... ;D We don't have the constant humidity of many places here, but the wide variance of temperatures between day and night causes condensation in tanks and mufflers. Rust kills... |
Title: Re: Rattlin' Header ? Post by zipidachimp on 08/20/21 at 13:46:20 I won't change it until I cancel the insurance in November. Maybe e-pay to the rescue ! Cheers! 8-) ps: 'ceramic' looks so much better than 'wrap' ! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |