SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> rear drive sprocket freeplay /cgi-bin/YaBB.pl?num=1628214123 Message started by eau de sauvage on 08/05/21 at 18:42:03 |
Title: rear drive sprocket freeplay Post by eau de sauvage on 08/05/21 at 18:42:03 Hi Guys, I have just discovered that the rear belt drive sprocket has both a bit of backlash, and a bit of side to side movement. Does this sound like a part is worn or does it sound like something just needs adjusting? 40k kms. Belt looks good. |
Title: Re: rear drive sprocket freeplay Post by Armen on 08/05/21 at 18:57:26 Take a look at Drag Bike Mike's article on the double wide bearing conversion. It makes it better than new. |
Title: Re: rear drive sprocket freeplay Post by verslagen1 on 08/05/21 at 19:28:51 The backlash is from the rubber dampers and I don't think it's detrimental. and yes go for DBM's double bearing conversion. |
Title: Re: rear drive sprocket freeplay Post by Dave on 08/06/21 at 04:47:35 The rotational free play is OK and allows some cushion for the belt. The axial wobble is a worn pulley hub bearing......it is a major cause of belt squeak. |
Title: Re: rear drive sprocket freeplay Post by eau de sauvage on 08/06/21 at 16:59:52 OK, thx. @Dave, I cannot locate the DBM thread yet, been at it all morning, so I haven't had a chance to see what the double bearing conversion entails yet, so in the meantime, if I decide to just get the bearing replaced, how urgent is that, like apart from a bit of squeak, would any other parts become damaged if this was left for a few weeks? |
Title: Re: rear drive sprocket freeplay Post by Armen on 08/06/21 at 17:06:52 I think this will get you there. Easy date. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1561964431 |
Title: Re: rear drive sprocket freeplay Post by eau de sauvage on 08/09/21 at 02:04:21 @Armen, OK< thanks, I will go over all this information can post back here if I have any more ???'s. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |