SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Re: Chain coversion for the Savage/S40
/cgi-bin/YaBB.pl?num=1628201757

Message started by Motopsycho1305 on 08/05/21 at 15:15:56

Title: Re: Chain coversion for the Savage/S40
Post by Motopsycho1305 on 08/05/21 at 15:15:56

I know, I know, I know. This subject has been done to death. But I can't seem to find the old post so any help would be appreciated. So I believe I saw somewhere on this forum that someone posted the sprocket size, front and rear, to make it the same as stock pulleys. They did say that there was a fitting problem with the front cause of clearance but I will be running an off set sprocket(running larger rear wheel) and so it might be ok. Thanks guys!

Title: Re: Chain coversion for the Savage/S40
Post by Dave on 08/06/21 at 04:51:17

There is an Index with links in the Technical Section......you can find all kind of things there:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927

Or you can use the Search button at the top middle of the page (don't use the one on the top right of the page it is worthless). You will have to put in some parameters like how far back you want to look, what section you want to look, etc.

Title: Re: Chain coversion for the Savage/S40
Post by Motopsycho1305 on 08/06/21 at 16:09:30

Thanks