SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Piston
/cgi-bin/YaBB.pl?num=1613492293

Message started by haggis57 on 02/16/21 at 08:18:13

Title: Piston
Post by haggis57 on 02/16/21 at 08:18:13

Does the piston head surface have a coating ?

Title: Re: Piston
Post by Dave on 02/16/21 at 12:26:54

Title: Re: Piston
Post by Gary_in_NJ on 02/16/21 at 13:54:22

Why do you ask? Are you looking to remove carbon build-up on the piston?

Title: Re: Piston
Post by haggis57 on 02/17/21 at 18:51:50

Already cleaned the head and piston surface of carbon.The piston surface showed up with one spot of bright Aluminum...I'm Like "oh nuts ..I've gone too far"... but if there's no coating I will keep going .

Title: Re: Piston
Post by Dave on 02/18/21 at 04:35:24

Just get off the thick carbon - you don't need to make it bright and shiny.

Get it clean enough that you can install the rings and put back on the bike without any crud. The top will get all black and yucky looking again as you ride.