SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Pannier Frames
/cgi-bin/YaBB.pl?num=1604712219

Message started by baldybiker on 11/06/20 at 17:23:39

Title: Pannier Frames
Post by baldybiker on 11/06/20 at 17:23:39

[img]https://www.bikepics.com/pics/2020/11/07/bikepics-2820533-984.jpg[img]I have the arrangement shown in the photo and my problem is finding suitable pannier frames. There is a suitable mounting point rear of the shock absorber but not, it appears, more rearward, closer to the indicator. Is there a solution to this?

https://www.bikepics.com/pics/2020/11/07/bikepics-2820533-984.jpg

Title: Re: Pannier Frames
Post by Dave on 11/07/20 at 02:40:57

This is what the factory uses for saddlebags. They frames prevent the saddlebags from touching the tire, shocks or exhaust. The saddlebags are connected and go on top of the fender or seat.

I am not aware of any factory mounts for hard saddlebags (panniers) - those who are running hard bags have likely made their own mounts.

This is what the Suzuki frames look like - they use the nuts that are located inside the fender.

https://www.ebay.com/i/114466590974?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=114466590974&targetid=935083617107&device=c&mktype=pla&googleloc=9014427&poi=&campaignid=10877150074&mkgroupid=107338199019&rlsatarget=aud-622524041438:pla-935083617107&abcId=9300400&merchantid=101501062&gclid=CjwKCAiAqJn9BRB0EiwAJ1SztVIE0_DSUzMRVvA9uvtISPK8WwMDOlKb8tVCZktt-jhemn0y9Gt5qxoCaegQAvD_BwE

Title: Re: Pannier Frames
Post by baldybiker on 11/07/20 at 05:18:40

Hi Dave,

That's helpful and makes sense from conversations I've had with my supplier, thank you. I've obviously been sold the wrong design of frame.

It's good to be part of this group.

Title: Re: Pannier Frames
Post by Hiko on 11/08/20 at 17:30:10

Here is how Ventura mount the rear of their bars [Relocation of turn signals optional] Basically a spacer down from where the turn signals mount