SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> WTB: 1986 harness, CDI /cgi-bin/YaBB.pl?num=1604284153 Message started by 1986 savage on 11/01/20 at 18:29:13 |
Title: WTB: 1986 harness, CDI Post by 1986 savage on 11/01/20 at 18:29:13 Need a harness for 86 resto-mod I am working on. I also suspect my CDI to be bad so I need a replacement. located in Bethesda, MD -Hunter |
Title: Re: WTB: 1986 harness, CDI Post by SoC on 11/02/20 at 08:06:29 I have a harness from an '03' I believe is compatable, not many differences from 87 as too connectors. Others who know might offer details if there is some difference. |
Title: Re: WTB: 1986 harness, CDI Post by verslagen1 on 11/02/20 at 11:32:50 The wiring is different between 86 and 03. hell, wiring is different between 86 and 87. so the handlebar controllers may not work... correctly. the TCI (ig box) has a different connector. you need a new TCI so it may be an option but if you do you'll need to swap the rotor for a newer one. The signal light connectors maybe different, not sure. so if you're going to use the 03 harness, you may want to replace everything. |
Title: Re: WTB: 1986 harness, CDI Post by 1986 savage on 11/04/20 at 08:59:15 62716667787573717A25140 wrote:
At this point I already have to replace the whole electrical system, except for the reg/rec. I'm also planning to add new lights, signals and handlebar controls. My other option is to use Clymer's to solder one together, but I would still need new connectors. Also, thanks for that cam chain tensioner! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |