SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Brake light wire conversion /cgi-bin/YaBB.pl?num=1599061963 Message started by @dab37 on 09/02/20 at 08:52:43 |
Title: Brake light wire conversion Post by @dab37 on 09/02/20 at 08:52:43 Alright fellas let me try and make this clear ass possible . I have removed the rear fender their for I'm going with a side mounted tag and brake light.. my new brake light has a red.blavk and blue wire . I'm trying to wire it into the braking harness witch those wires are brown,white and black with a white stripe anyone know what goes to what by chance ? |
Title: Re: Brake light wire conversion Post by justin_o_guy2 on 09/02/20 at 09:08:04 You have the old lights You know which wiring harness wires were used And Which lamp And What filament Each wire activated. With a battery and two wires, or a charger You can play with your new lights and figure out how to connect it. |
Title: Re: Brake light wire conversion Post by SavageMan99 on 09/02/20 at 11:11:17 Black/white... Ground. White... Brake. Brown... Running light. Black... Ground. Red... Brake. Blue... Run. |
Title: Re: Brake light wire conversion Post by @dab37 on 09/02/20 at 14:35:23 Yes sir !! Matched up perfect [ch128076] much appreciated for real ! Just saves a lot of time , headaches. And maybe a few fuses lol . |
Title: Re: Brake light wire conversion Post by Ruttly on 09/02/20 at 14:45:25 One wire , hookem up Two wire , Phuckem up Three wire , better call a pro ;D ;D ;D |
Title: Re: Brake light wire conversion Post by SavageMan99 on 09/03/20 at 08:58:37 My memory is a crap shoot, but I've just been foolin with those same wires. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |