SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Next Pilot jet /cgi-bin/YaBB.pl?num=1598746134 Message started by JayR on 08/29/20 at 17:08:53 |
Title: Next Pilot jet Post by JayR on 08/29/20 at 17:08:53 So I put the KN cone filter and I find I'm having to back out the brass mix screw out a lot to run good. I understand that it's possible for the thing to fall out and I should upgrade the pilot. Can someone provide me a link of what I should buy? Thank you, Jay |
Title: Re: Next Pilot jet Post by Dave on 08/29/20 at 18:07:17 If you have to turn the screw out more than 3 turns, you need a larger pilot jet. Most bikes run fine with a #50 or #52.5. Running a #55 is likely too rich on any Savage. Here is a link that describes which jets fit. You want the jets for the CV carb in the second part......the first part if for the VM carb. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1262724030 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |