SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Rear Directional Mounting /cgi-bin/YaBB.pl?num=1592242979 Message started by Billbo on 06/15/20 at 10:42:59 |
Title: Rear Directional Mounting Post by Billbo on 06/15/20 at 10:42:59 Hello, I am new to the group. I recently purchased a used 1996 Savage and decided to customize it. I removed the rear fender and am now having trouble finding a location for the rear directionals (which I need in my state to pass inspection). Please note, per some Youtube video, I have already cut the passenger seat support brackets which would have been perfect using the seat bracket. According to my mechanic I shouldn't have done this. I guess I also need some sort of fender. Any advice would be helpful. Thx. Bill |
Title: Re: Rear Directional Mounting Post by Serowbot on 06/15/20 at 11:52:24 Can you make out the metal u-shaped bracket there?... Mine are tail/brake lights but they could be turn signals if you need them. It's bolted to those two heavy frame bolts that hold the fender under the seat. |
Title: Re: Rear Directional Mounting Post by Billbo on 06/15/20 at 11:59:28 Thank you for the response Serowbot. I had already cut off those hole for those frame bolts. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |