SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Torque limiter?
/cgi-bin/YaBB.pl?num=1586725100

Message started by Berzerker on 04/12/20 at 13:58:20

Title: Torque limiter?
Post by Berzerker on 04/12/20 at 13:58:20

I have looked on bike bandit for the torque limiter to swap out I caint seem to find it, if anyone has a link for it I would really appreciate it, thank u.

Title: Re: Torque limiter?
Post by verslagen1 on 04/12/20 at 14:16:44

I have one but it's missing the retaining rings.

https://www.ebay.com/itm/2005-2015-Suzuki-Boulevard-S40-Savage-LS650-Starter-Kickback-Limiter-Gear/184125706757?hash=item2adebf5205:g:qSEAAOSwrxpeG9ii

https://www.ebay.com/itm/05-Suzuki-LS650-S40-LS-650-Boulevard-Savage-Engine-Starter-Motor-Idler-Gear/273515978820?hash=item3faed2a044:g:4FUAAOSwXbFbyiBi

and I think intruder gears are the same, please the oem fishe
https://www.ebay.com/itm/2001-Suzuki-Intruder-VL-1500-Starter-Idle-Limiter-Gear/233223391187?epid=14011439288&hash=item364d3287d3:g:uyIAAOSwRhZc1aB2

https://www.ebay.com/itm/1998-04-SUZUKI-INTRUDER-1500-VL-STARTER-GEAR-IDLER/264084308525?hash=item3d7ca6c22d:g:wP0AAOSwUalcEEmP

Title: Re: Torque limiter?
Post by Berzerker on 04/12/20 at 14:19:26

NEVER MIND, SORRY guys. I found it. Everytime I was going to bike bandit It was defaulting to my 87' so I couldn't find it. Thank u and sorry again.

Title: Re: Torque limiter?
Post by Berzerker on 04/12/20 at 14:21:32

Versi Would u happen to have a case cover ?

Title: Re: Torque limiter?
Post by Berzerker on 04/12/20 at 14:25:24

Could I order missing retaining rings?

Title: Re: Torque limiter?
Post by verslagen1 on 04/12/20 at 14:42:51

79445858664247474E592B0 wrote:

Versi Would u happen to have a case cover ?

I have an '88 extra. :)

Title: Re: Torque limiter?
Post by verslagen1 on 04/12/20 at 14:43:28

063B2727193D38383126540 wrote:

Could I order missing retaining rings?

I'll see if I can figure out the right size.

Title: Re: Torque limiter?
Post by Berzerker on 04/12/20 at 15:03:58

Thank u VERRY much. Just let me know what retaining rings I need to order and how much the total is for torque limiter and chrome caps. I really appreciate u, I wouldn't have even gotten this far with out u and the guys here. If I have to mod my case cover I will.