SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Belt size and tooth form. /cgi-bin/YaBB.pl?num=1569657008 Message started by zevenenergie on 09/28/19 at 00:50:08 |
Title: Belt size and tooth form. Post by zevenenergie on 09/28/19 at 00:50:08 I want to make some changes to my savage and it needs a longer belt. I have Clymer 1986- 1988. My bike is from 1994 and has a 4speed engine. The Clymer drive belt specification’s are: Bando 133h-14M 40.0 14 M stands for a round shape of the teeth on the belt. http://https://i.imgur.com/tqgSEuWl.png I can buy a 140 -14M-40.0 and many other lengths are available here. ($75,-) But the problem is the teeth on my current (original) belt and poelie,s are trapezium in shape. Usually indicated with 14T http://https://i.imgur.com/VQdHZBtl.jpg Is Clymer wrong? Or have different drive belts been used over the years? Ore can or both tooth 14M &14T shapes be used? Can someone enlighten me? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |