SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ryca parts
/cgi-bin/YaBB.pl?num=1569162510

Message started by Blanco Willy on 09/22/19 at 07:28:30

Title: Ryca parts
Post by Blanco Willy on 09/22/19 at 07:28:30

Does anyone on here know of or have any used ryca parts for sale. I am mainly in search of the rearset bracket and rearsets. Also if anyone has any good used 13in shocks, I might be interested in those. And Front and rear rim set in good shape.

Title: Re: Ryca parts
Post by ZSteele on 09/22/19 at 07:43:33

Bump for multiple rearset brackets [ch128556]

Title: Re: Ryca parts
Post by Blanco Willy on 09/22/19 at 07:54:38

I know the creative minds that participate on this forum and I'm sure someone has a viable idea on installing rearsets. ;)

Title: Re: Ryca parts
Post by Gary_in_NJ on 09/22/19 at 08:19:26

The only two viable options I’m aware of are:

1. Buy RYCA’s
2. Weld up your own

I’ve yet to see a RYCA part out.

Title: Re: Ryca parts
Post by ZSteele on 09/22/19 at 08:19:59

Ductape? [ch128512]

Title: Re: Ryca parts
Post by verslagen1 on 09/22/19 at 10:45:29

If I were doing it, I'd replace the rear engine mount with some steel plates extending down to that area.
A couple of thru bolts mounting similar plates for the pegs to mount to and you got it.

Title: Re: Ryca parts
Post by Blanco Willy on 09/22/19 at 11:17:29

Hey that's something I'll definitely look into. Thanks for your input Verslagen1.[ch129504]

Title: Re: Ryca parts
Post by Gary_in_NJ on 09/22/19 at 11:29:13

160512130C0107050E51600 wrote:
If I were doing it, I'd replace the rear engine mount with some steel plates extending down to that area.
A couple of thru bolts mounting similar plates for the pegs to mount to and you got it.

Don’t forget that you also have to fabricate a shift mechanism

Title: Re: Ryca parts
Post by Armen on 09/22/19 at 13:49:19

After much head scratching, I gave up and bought the Ryca bracket. Heavy, but they fit well.
One day I'll make a set of brackets out of aluminum. Not this week...

Title: Re: Ryca parts
Post by Blanco Willy on 09/22/19 at 13:57:06

I don't believe they sell the bracket separately from the cs-1 kit anymore. Looks like they used to sell it with the chain conversion kit,but I didn't see that it was still available.

Title: Re: Ryca parts
Post by Ruttly on 09/22/19 at 14:55:02

Call them it's available

Title: Re: Ryca parts
Post by Ruttly on 09/22/19 at 14:58:11

I believe they make 2 , belt or chain drive

Title: Re: Ryca parts
Post by Gary_in_NJ on 09/22/19 at 15:00:45

It’s part number RM-0072 for $399.

Title: Re: Ryca parts
Post by Gary_in_NJ on 09/22/19 at 17:34:05

I was just looking through the RYCA website. It would appear that all of the kit parts (all models) and accessories for their kits are out of stock. Yet, there are generic items for street & dirt bikes that have never been available through RYCA.

Has RYCA stopped producing their kits?

Title: Re: Ryca parts
Post by Blanco Willy on 09/22/19 at 18:10:27

Probably made to order by now. Didn't ask Ryan .

Title: Re: Ryca parts
Post by Ruttly on 09/22/19 at 18:52:00

Their website is new and very slow , may not be completed yet.

Title: Re: Ryca parts
Post by ohiomoto on 09/23/19 at 08:11:40

A few of us have made "mid-controls" that basically copied RYCA's rears set brackets in one-way or another.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1487785879

Title: Re: Ryca parts
Post by Tacopimp on 09/25/19 at 12:11:59

645A5F5F4A330 wrote:

I have rear shocks, but one of them needs a bushing. I removed it to see if it could be used on my rigid struts.