SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Do I remove anything from Yamaha Raptor petcock? /cgi-bin/YaBB.pl?num=1566060220 Message started by WolverineWinMX on 08/17/19 at 09:43:40

Title: Do I remove anything from Yamaha Raptor petcock? Post by WolverineWinMX on 08/17/19 at 09:43:40 I am installing this Yamaha Raptor petcock today and had a question? This is how it came out of the box. Do I remove anything? #1 looks plugged up. #2 looks plugged up. #3 is covered by the clear tube. I watched a video but the guy already had the new petcock up inside so I couldn’t tell if he removed anything. Thanks for any advice and suggestions!

Title: Re: Do I remove anything from Yamaha Raptor petcoc Post by justin_o_guy2 on 08/17/19 at 09:53:20 The clear plastic sleeves are to protect the filter from stuff in shipping. Remove them Inspect the tank and make sure no paint flakes or crud will be interfering with the rubber seal.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.