SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Choke Primer plunger kit(s) /cgi-bin/YaBB.pl?num=1562350560 Message started by S40_Bandito on 07/05/19 at 11:16:00 |
Title: Choke Primer plunger kit(s) Post by S40_Bandito on 07/05/19 at 11:16:00 @Savage_Rob or any other Aficionado Can you tell me the Choke Plunger model you purchased. I wanted to replace mine as well along with the petcock; I am in the process of doing the carb-rebuild. Anybody can chime in if you have already replaced your or you know the model to look for OEM or after-market. I found this on Amazon and i want to know if it's the right one before I pull the trigger on my cart. https://www.amazon.com/DAPCO-Mikuni-Primer-Kit/dp/B0055DQERU/ref=sr_1_4?keywords=Mikuni+Primer+Kit&qid=1562350346&s=automotive&sr=1-4 |
Title: Re: Choke Primer plunger kit(s) Post by verslagen1 on 07/05/19 at 11:54:47 I don't believe anyone has ever used this kit on our bikes. As I don't think it's necessary. The stock petcock has a prime setting and the raptor petcock doesn't need it. |
Title: Re: Choke Primer plunger kit(s) Post by batman on 07/05/19 at 19:55:05 Savage /S40 choke is listed as --plunger assy. 13411-24COO -about $34.00 ( don't no what the heck that thing is in the pic. on" am moose on ") but it won't work on a Savage.) Petcock- Yamaha Raptor 660 - Fuelcock assy. 5LP-24500-01-00 about $25.00 |
Title: Re: Choke Primer plunger kit(s) Post by Dave on 07/06/19 at 03:43:52 That thing you linked to is a "primer"....when you use it there is a "squirt" of fuel injected wherever you connect the tube. I would not install it on a Savage (or any other engine). The "enrichment" shaft/button on the Savage opens up a circuit that allows a richer mixture.....not a squirt of raw fuel. If you need a new enrichment shaft - bite the bullet and buy one from Suzuki. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |