SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Threaded frame studs for rear brake pedal spinning
/cgi-bin/YaBB.pl?num=1561945270

Message started by valdezdelbx on 06/30/19 at 18:41:10

Title: Threaded frame studs for rear brake pedal spinning
Post by valdezdelbx on 06/30/19 at 18:41:10

Anyone ever have the threaded studs that hold the rear brake pedal assy and fwd exhaust heat shield spin in the frame? The way it catches here and there makes it seem like there's something i should be able to do to get it to tighten up.

Title: Re: Threaded frame studs for rear brake pedal spin
Post by badwolf on 06/30/19 at 18:58:17

Those aren't studs. They are thru bolts. Look on the other side and you will see the heads of the bolts.
They go thru the engine and when you loosen them expect some oil leakage, normal.
You will have to remove them whenever you remove the exaust header or remove the right side cover. ( like to check the cam chain tensioner )

Title: Re: Threaded frame studs for rear brake pedal spin
Post by valdezdelbx on 07/01/19 at 04:46:32

Ah, perfect, that explains the oil too. Guess I wasn't paying attention after a day of doing a new exhaust, rejetting and replacing fork seals...I'll blame it on that...