|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Pulley Covers? /cgi-bin/YaBB.pl?num=1561408033 Message started by philthymike on 06/24/19 at 13:27:13 |
|
Title: Pulley Covers? Post by philthymike on 06/24/19 at 13:27:13 I totally want this! http://www.1cruiser.com/sa/p/REAR_PULLEY_COVER_SUZ_LS_650.htm Why don't they make them anymore? Are there other options? |
|
Title: Re: Pulley Covers? Post by verslagen1 on 06/24/19 at 13:59:49 You could probably make a flat prefinished plate work. |
|
Title: Re: Pulley Covers? Post by hotrod on 06/24/19 at 14:07:24 Looks like the meat slicer from one of the early Moto Guzzi's. |
|
Title: Re: Pulley Covers? Post by batman on 06/24/19 at 14:31:08 It's steel ,why add the extra weight ? You could just have the stock pulley chromed . |
|
Title: Re: Pulley Covers? Post by verslagen1 on 06/24/19 at 14:37:57 Guessing at 8" diameter x .03" thick that's .9 lbs. outta steel. could be thinner, could be aluminum. one lb aint gonna break the bank. I assume he wants to fill in the holes to. Maybe you'll need one for the front too? |
|
Title: Re: Pulley Covers? Post by philthymike on 06/24/19 at 15:11:13 5A495E5F404D4B49421D2C0 wrote:
I stopped at the sheet metal shop on my way home and the guy said he can fab up a flat version of it for me easily. So I figured what the heck? Good excuse to meet a potentially helpful new resource. He's going to use 1/8" aluminum. |
|
Title: Re: Pulley Covers? Post by batman on 06/24/19 at 20:52:33 Try to keep it out of the salt! :D |
|
Title: Re: Pulley Covers? Post by philthymike on 06/25/19 at 08:40:12 Once I'm done rehabbing this bike I'm not riding it in the winter anymore. I'm probably gonna pick up a little 250 dual sport this fall and that will become my winter bike. |
|
Title: Re: Pulley Covers? Post by philthymike on 07/12/19 at 19:04:46 Here's the cover I had made |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |