SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 800 Intruder triple tree /cgi-bin/YaBB.pl?num=1557594804 Message started by SavageMan99 on 05/11/19 at 10:13:24 |
Title: 800 Intruder triple tree Post by SavageMan99 on 05/11/19 at 10:13:24 Do these use the same steering shaft bearings, and same size tire? How does one find a matching rear? |
Title: Re: 800 Intruder triple tree Post by verslagen1 on 05/11/19 at 10:33:11 2000/04 vs800gl 100/90-19 front 140/90-15 rear, g means shaft drive. hub is not compatible. upper and lower bearings the same. front and rear axles the same. |
Title: Re: 800 Intruder triple tree Post by SavageMan99 on 05/11/19 at 10:52:26 So at least the tires swap. Any rear rims that would match? |
Title: Re: 800 Intruder triple tree Post by Fast 650 on 05/12/19 at 12:29:13 From what I have read, the entire fork assembly, trees and all, is supposed to be a direct swap. Which is something to consider if you wanted to change your gearing since those have the speedometer drive on the front wheel. And I believe the Intruder/Marauder uses a larger front disk so that would be a brake upgrade too. |
Title: Re: 800 Intruder triple tree Post by SavageMan99 on 05/13/19 at 08:28:12 That's good to know. Now to find a matching rear wheel. |
Title: Re: 800 Intruder triple tree Post by verslagen1 on 05/13/19 at 12:14:10 5E796B6C2E2D28180 wrote:
but are single piston like the savage. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |