SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Mikuni Carb Differences 24c5 vs 24c4 /cgi-bin/YaBB.pl?num=1557085408 Message started by cuda_tim on 05/05/19 at 12:43:28 |
Title: Mikuni Carb Differences 24c5 vs 24c4 Post by cuda_tim on 05/05/19 at 12:43:28 Hey, so I'm working on a 1999 Savage that was in storage for many years, and it appears that the system was never drained of fuel. Hence, the float is stuck (among other problems) due to a green varnish stuck to everything. So rather than try and rebuild the original 24c5 carb, I found a "slightly used rather clean" 24c4. The only obvious difference (and there are probably many more internally) is a missing hose connection on the 24c4. Since this is my first post, the next message includes a picture of both carbs, side-by-side (24c4 is on the left). I have tried (not too hard) to locate where the hose connects to, somewhere down below the airbox. But I figured I'd ask first, and also get a reading on how important the connection might be. Also, if someone can direct me to a reference document on each carb, that might be nice to have. Anybody? Thanks! |
Title: Re: Mikuni Carb Differences 24c5 vs 24c4 Post by cuda_tim on 05/05/19 at 12:44:28 Here is the pic... http://https://i.postimg.cc/J0pxbFkB/savagecarb.jpg |
Title: Re: Mikuni Carb Differences 24c5 vs 24c4 Post by verslagen1 on 05/05/19 at 13:56:41 The one on the right is a california model and the extra port connects to a carbon canister that sits below the swingarm. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |