SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Print bobber wire diagrams
/cgi-bin/YaBB.pl?num=1556044460

Message started by SavageMan99 on 04/23/19 at 11:34:20

Title: Print bobber wire diagrams
Post by SavageMan99 on 04/23/19 at 11:34:20

Wondering if anyone would print the bobber wiring diagrams in the tech section and mail them to me?
My printer and android don't talk to each other.

Title: Re: Print bobber wire diagrams
Post by SavageMan99 on 04/23/19 at 13:20:37

Also, regarding the pick up coil possibly allowing the battery to drain,
What wire would a switch be put in to prevent that?
I'm using a triple pole, double throw switch for an off/on.

Title: Re: Print bobber wire diagrams
Post by verslagen1 on 04/23/19 at 13:28:54

never heard of a pickup coil draining the battery.
but the decomp controller is always hot and will try to start the bike unattended.
yes, a small drain on the battery, something like 50ma.

if you leave the key on, not only will you drain the battery, but due to the current running thru the ignition coil you'll burn up the TDI.

Title: Re: Print bobber wire diagrams
Post by SavageMan99 on 04/24/19 at 09:27:48

I have read of the bike going dead if the flywheel stops in a certain spot as it tries to energize the ignition?

Title: Re: Print bobber wire diagrams
Post by Dave on 04/24/19 at 09:47:02

1321362127250D212E7979400 wrote:

I have read of the bike going dead if the flywheel stops in a certain spot as it tries to energize the ignition?

This is the first I have ever heard of it.......I really believe the bike was not designed with such a serious flaw.

Title: Re: Print bobber wire diagrams
Post by verslagen1 on 04/24/19 at 09:53:34

0331263137351D313E6969500 wrote:

I have read of the bike going dead if the flywheel stops in a certain spot as it tries to energize the ignition?

Quote:

if you leave the key on, not only will you drain the battery, but due to the current running thru the ignition coil you'll burn up the TDI.

Your fix is to put a switch in the sensor, my fix is to turn the ignition off and pull the key. It is not a problem waiting to be fixed.

Title: Re: Print bobber wire diagrams
Post by SavageMan99 on 04/24/19 at 10:32:37

Is this correct?
I'm wondering about the gray/black wire to the coil and ignitor both?