SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 09 S40 bobber project /cgi-bin/YaBB.pl?num=1551659094 Message started by Justjoshin on 03/03/19 at 16:24:50 |
Title: 09 S40 bobber project Post by Justjoshin on 03/03/19 at 16:24:50 Picked up this 2009 S40 with just under 11k miles for a bobber build project. This is my 3rd bike ever and first mod project for a bike. |
Title: Re: 09 S40 bobber project Post by 1997savagedude on 03/03/19 at 16:28:22 That bike looks like its in great shape. i just posted about my 97 build. We will have to compare notes. I am going for more of a custom cruiser look. Good luck! |
Title: Re: 09 S40 bobber project Post by Justjoshin on 03/03/19 at 16:29:01 Tear down under way: |
Title: Re: 09 S40 bobber project Post by Justjoshin on 03/03/19 at 16:33:40 Low Brow Customs Frisco tank and 7” contour fender mock up. Also turned the risers around to push them forward. |
Title: Re: 09 S40 bobber project Post by Justjoshin on 03/03/19 at 16:34:54 Cut and notched the fender for the look I wanted: |
Title: Re: 09 S40 bobber project Post by Justjoshin on 03/09/19 at 18:13:04 Finished mocking up rear fender and tank so I will be getting the tins to paint. I am going to use the stock air box to hide the wires. Running the harness back on the bike is a PITA! I know that I am going to have to extend a few wires. Anyone have some examples of how you ran the harness for a clean look? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |