SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> NEED Carb help on 2004 RYCA
/cgi-bin/YaBB.pl?num=1548800372

Message started by randyradio on 01/29/19 at 14:19:32

Title: NEED Carb help on 2004 RYCA
Post by randyradio on 01/29/19 at 14:19:32

Hi Gang I've been off here several yrs now. I have a beautiful KYCA done from a 2004 Savage. It's show quality. Been sitting 2 yrs and need how to info on pulling the carb and cleaning it. my email ashurst1@comcast.net

Title: Re: NEED Carb help on 2004 RYCA
Post by NRR Boot on 01/29/19 at 14:52:22

YouTube has an awesome video...

https://www.youtube.com/watch?v=GwEOHiqP7Vw

Title: Re: NEED Carb help on 2004 RYCA
Post by Gary_in_NJ on 01/29/19 at 15:37:39

Randy,

It really as easy as removing, disassemble, cleaning and reassembling. If you re-jetted your carb when you built the bike, it's the same process.

Title: Re: NEED Carb help on 2004 RYCA
Post by Gyrobob on 03/07/19 at 17:25:30

How's the carb cleaning project going? I'm about to do two carbs side by side.