SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Speedometer swap LED Indicators.. Resistors? /cgi-bin/YaBB.pl?num=1542315156 Message started by Witchdoctor on 11/15/18 at 12:52:36 |
Title: Speedometer swap LED Indicators.. Resistors? Post by Witchdoctor on 11/15/18 at 12:52:36 Greetings I'm thinking of using a speedometer with the turn signal, neutral, and high beam indicators built in..and they are all LED. Do I need resistors?.. I avoided LED blinkers because I didn't want to mess with anything (resistors or pre-made crap and a new relay) and proper incandescent blinkers look much softer anyways. |
Title: Re: Speedometer swap LED Indicators.. Resistors? Post by Dave on 11/15/18 at 16:13:38 Nope......the small bulbs have no affect on the flasher........they will be fine in either filament or LED. |
Title: Re: Speedometer swap LED Indicators.. Resistors? Post by ohiomoto on 11/15/18 at 20:29:37 I have one and Dave is correct. |
Title: Re: Speedometer swap LED Indicators.. Resistors? Post by Witchdoctor on 11/16/18 at 10:02:39 REALLY appreciate the quick help Dave!! 8-) Glad to get rid of my stock tank mounted speedometer! |
Title: Re: Speedometer swap LED Indicators.. Resistors? Post by Witchdoctor on 11/24/18 at 14:53:21 Just an update. Speedometer came with good instructions that were not in chinglish. The LED indicators work fine but I did need two diodes for the blinker indicator. One on each positive lead going from the blinkers to the speedo. Works great.. I would show off the bike a bit but for some reason I can get any pics to post on this forum anymore. :D |
Title: Re: Speedometer swap LED Indicators.. Resistors? Post by GOF on 11/24/18 at 15:25:48 How accurate is the new speedo? What have you done with the hole in the tank? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |