SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Turn signals /cgi-bin/YaBB.pl?num=1539833294 Message started by Mike Austin on 10/17/18 at 20:28:13

Title: Turn signals Post by Mike Austin on 10/17/18 at 20:28:13 I see turn signals that stay lit until made to flash, how do you do this, Thanks!

Title: Re: Turn signals Post by batman on 10/17/18 at 20:45:21 If your talking about the front turn signals, their double filament bulbs ,(three wire ,run,- (on always) ,  turn,and  ground) one filament for running lights , the other for turn signals . The rear are single filament for turn only (two wire, - turn and ground).

Title: Re: Turn signals Post by Dave on 10/18/18 at 05:26:37 You can buy control modules that will turn the rear turn signals into running lights, brake lights and flash as turn signals. The model I used on my Ninja Cafe’ bike was about $80. If you are using the rear turn signals as running and brake lights - they are required to have red lenses.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.