SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> clutch lever switch
/cgi-bin/YaBB.pl?num=1539544815

Message started by wakosama on 10/14/18 at 12:20:15

Title: clutch lever switch
Post by wakosama on 10/14/18 at 12:20:15

is there a cover over this switch? mine twists around on a single screw and misaligns with the lever push pad, parts appear exposed and the plunger not very strong. can't find a pic either?????? what 'should' it look like please?

Title: Re: clutch lever switch
Post by Ruttly on 10/14/18 at 15:03:29

Bypass it and see if it cranks & starts

Title: Re: clutch lever switch
Post by batman on 10/14/18 at 17:34:14

Better yet bypass it and toss it . It's already trained you to pull in the clutch lever before hitting the starter button, and if you start the bike while leaving the side stand down, (with the bike in neutral) it serves no useful purpose . it's a switch that functions each and every time the lever is pulled in( Both starting and shifting) so sees a lot of use ,most of the time unneeded , and may wear out anyway.

Title: Re: clutch lever switch
Post by Papa Bear on 10/18/18 at 10:17:11

It should have a small tab along with the screw to keep it located.
It's easy to break the tab when trying to remove the switch