SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> EASTWOOD /cgi-bin/YaBB.pl?num=1537799701 Message started by MMRanch on 09/24/18 at 07:35:01 |
Title: EASTWOOD Post by MMRanch on 09/24/18 at 07:35:01 Welll , I've parked my bike under the edge of the South Side of the carport for about 3 years now. The UV Sunlight has taken its toll on one side of my last paint job. :-? The wife has the North Side with her "Toys" , and I'm not one to argue , so I'll be stuck with the South Side for as long as I get to keep her. And thats " OK " . :) Last time I used a Polyurthane Top Coat. It stood-up to GAS just fine , but I'm ready to try something else next time. So , I'm thinking of these EASTWOOD two part paints , ... ANYBODY TRIED THEM YET ? https://www.eastwood.com/eastwood-s-2k-aerospraytm-high-gloss-matte-clear.html Here is the last time photo |
Title: Re: EASTWOOD Post by DieselBob on 09/24/18 at 08:20:14 - I got mine from the local NAPA auto paint store to do the clear coat on the Savage tank. Same can with a different label and other local paint suppliers carry it as well. Check out 2K Spray Max on Amazon. I think it's $12.99. Once punctured to mix the two parts it's a 48 hour pot life. My son was building a bike at the time, so we did the two tanks at once. Worked great and has stood up well. The one can was just right for 2 tanks. - |
Title: Re: EASTWOOD Post by MMRanch on 09/24/18 at 09:02:23 Bob I hadn't thought of finding it locally , that's a good idea . That $25.oo a can leaves EASTWOOD sort of shooting themselves in the foot the way I see it. So , did ya do the base coat and top coat in the good stuff ? And What about that "respirator" breathing thing … how bad are the fumes . ? |
Title: Re: EASTWOOD Post by Dave on 09/24/18 at 09:31:10 796B796B66757A777C340 wrote:
The same auto store you buy the paint.....will have respirators that come in a sealed bag and are affordable. You can keep them in the bag and use them over and over again. https://www.uline.com/BL_1091/3M-5000-Respirators |
Title: Re: EASTWOOD Post by DieselBob on 09/24/18 at 11:23:15 - Quote:
Yes, but I don't recall what we used for the base coat. It seems the auto-archive function in my brain's a little sketchy. - |
Title: Re: EASTWOOD Post by engineer on 09/24/18 at 13:42:09 Thanks for the tip. I've been planning to buy the two part paint for my old BMW Airhead project. Maybe I can do the tank and the two fenders with one can. |
Title: Re: EASTWOOD Post by Matchless G11 on 09/24/18 at 17:27:33 [quote author=627062707D6E616C672F0 link=1537799701/0#2 date=1537804943] Bob I hadn't thought of finding it locally , that's a good idea . That $25.oo a can leaves EASTWOOD sort of shooting themselves in the foot the way I see it. Did that start with "I know what you're thinking. "Did he fire six shots or only five?" ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |