SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Your motorcycles /cgi-bin/YaBB.pl?num=1517179930 Message started by GT61 TURBO ZX14 on 01/28/18 at 14:52:10 |
Title: Your motorcycles Post by GT61 TURBO ZX14 on 01/28/18 at 14:52:10 Post all the upgrades that you have done to your motorcycle or motorcycles. |
Title: Re: Your motorcycles Post by Ruttly on 01/28/18 at 19:13:57 ;D ;D ;D ;D ;D ;D Waay to many bikes waay to many mods Just the RYCA tracker would takes hours ! |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 01/29/18 at 02:31:35 426564647C69100 wrote:
Just a picture of them done and write what you have done to them. IT WILL BE FUN TO SEE ALL THE DIFFERENT MODES. |
Title: Re: Your motorcycles Post by Dave on 01/29/18 at 03:12:07 Been there......done that. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1383565946 |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 01/29/18 at 03:17:57 4D767B6C7D716A6C777F726D1E0 wrote:
Wow lol I see I bet that took awhile |
Title: Re: Your motorcycles Post by Dave on 01/29/18 at 03:54:21 If you want your project in that list......you have to keep a single thread going for the build. You can't post a lot of scattered threads, as there just isn't any way to keep track of them or link them together. Once the project is far enough along to actually be a "build", then I will add the project to the list. |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 01/29/18 at 05:13:08 142F2235242833352E262B34470 wrote:
Ok |
Title: Re: Your motorcycles Post by Christof13T on 01/29/18 at 05:18:42 Take a look at the build titled ... I think... "my savage... sort of" or something like that... That thread illustrates that you can do pretty much anything with these little bikes. It's only a matter of imagination, time, and money of course... |
Title: Re: Your motorcycles Post by Christof13T on 01/29/18 at 05:37:31 found it... http://suzukisavage.com/cgi-bin/YaBB.pl?num=1264727267 |
Title: Re: Your motorcycles Post by ohiomoto on 01/29/18 at 06:24:34 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1472222031/0 |
Title: Re: Your motorcycles Post by ohiomoto on 01/29/18 at 06:26:35 5A716B706A6D767F282A4D190 wrote:
Love that project. It just kept evolving. His dad built some wild stuff too. |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 02/02/18 at 20:36:36 Yup he did a lot |
Title: Re: Your motorcycles Post by smokin_blue on 02/04/18 at 11:26:26 too much to list..... http://www.street-unique.com/ plus http://suzukisavage.com/cgi-bin/YaBB.pl?num=1453341892 |
Title: Re: Your motorcycles Post by snels516 on 02/04/18 at 17:43:21 Smokin, I recently snagged a GS750 front end for my bike. Could you explain your brake upgrade on purple passion? Did you have to fab a new mount for the caliper? Source of the disc? Etc |
Title: Re: Your motorcycles Post by jcstokes on 02/04/18 at 20:29:52 Gt 61, just call your build Stroked Savage and leave it at that. |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 02/05/18 at 14:08:58 :-? 242D3D3A21252B3D4E0 wrote:
This motor isn't getting stroked the next one will be it takes awhile to get parts made especially one-off custom stuff |
Title: Re: Your motorcycles Post by verslagen1 on 02/05/18 at 15:26:26 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1427082320 http://suzukisavage.com/yabb2.2/Attachments/beast5-28-15.jpg |
Title: Re: Your motorcycles Post by GT61 TURBO ZX14 on 02/05/18 at 17:46:04 53405756494442404B14250 wrote:
Is that yourbike |
Title: Re: Your motorcycles Post by smokin_blue on 02/06/18 at 10:05:35 415C575E41070304320 wrote:
The brake disks I like are from a Ducati 320mm diameter. They are a 6 bolt patern. it doesn't match the old suzuki hub but since it also needs to be spaced out I made a spacer with offset bolt pattern. Here is the pic from Cafe a la Carte. The one in the pic below is stock Ducati (Brembo) but the wave rotor on Purple Passion was either Braking or EBC I would have to check the bike. http://www.street-unique.com/CafealaCarte/Photos/ROTOR-ADAPTER.JPG Then as far as the brake caliper mount, yes I chose to use an early GSX-R/Bandit 4 piston unit I had in the bin. I made an adapter that you can see in this pic. http://www.street-unique.com/PurplePassion/Photos/PP-FRONTBRAKE.JPG |
Title: Re: Your motorcycles Post by badwolf on 02/06/18 at 10:35:13 Blue, I am all-in on your front brake upgrade! I think anyone trying to get more performance from our bikes should start with a front brake upgrade. I'm running a twin piston caliper from a Suzuki 650 twin and a 290mm disc, the mount mod was easy. (Compared to some other things I've done on it, like bigger tank, or solo sprung seat, or higer gearing.) I will be switching over to a 16'' front wheel and 100/90 16 tire soon and the 3'' smaller wheel will make the brake even stronger. Having a strong front brake makes for a much more relaxing ride. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |