SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> How do you figure out this is something you can do
/cgi-bin/YaBB.pl?num=1517130130

Message started by justin_o_guy2 on 01/28/18 at 01:02:10

Title: How do you figure out this is something you can do
Post by justin_o_guy2 on 01/28/18 at 01:02:10

http://www.scoopyweb.com/2018/01/the-monumental-earthworks-of-stan-herd.html

Really neat art.

Title: Re: How do you figure out this is something you ca
Post by batman on 01/28/18 at 22:01:36

I like it! I think you pick the design and size of the plot ,you then draw a grid over a picture ,and scale it up on site knowing what shapes and lines fill each grid. It would be harder to determine what materials to use to get the textures and colors needed and make it easier to maintain.

Title: Re: How do you figure out this is something you ca
Post by justin_o_guy2 on 01/28/18 at 22:17:47

How do you show it off?
This guy is a descendent of the people who did the Nazca lines, obviously..

Title: Re: How do you figure out this is something you ca
Post by Eegore on 01/30/18 at 09:37:18

Grid system before software came out that makes it really easy to do with GPS.

I've lived on agricultural land all my life and my grandfather used to disc after fall harvest all kinds of design in the fields. Sometimes a local company would pay for it, a few years Budweiser I can remember when I was young.

Now its super easy, load a graphic, overlay it on a plot then upload to GPS. You can then input the patter on a modern tractor and it will literally drive itself, all you have to do is run the equipment to make sure you are pulling the right blade at the right time.

Title: Re: How do you figure out this is something you ca
Post by justin_o_guy2 on 01/30/18 at 16:32:13

Neat looking stuff, anyway.
I guess now with 3D printers creating a
Sculpture
Is suddenly not that tough..

They didn't have GPS controlled tractors when they did theNazca lines,,
My grandpa didn't either.
I never would have thought about how it would be possible to do that super landscaping. Thanks, E.

Title: Re: How do you figure out this is something you ca
Post by batman on 01/31/18 at 11:04:01

How do you show it off? That's the kind off thing that keeps "chopper " pilots employed ! ( I think most of these are near airport approaches )

Title: Re: How do you figure out this is something you ca
Post by LANCER on 02/01/18 at 02:55:51

I really like this one.

http://lh3.googleusercontent.com/-KbuqWiwstAU/Vg6xBJAyejI/AAAAAAABHWk/yWKuaMdcfsI/stand-herd-crop-art-13%25255B5%25255D.jpg?imgmax=800

Title: Re: How do you figure out this is something you ca
Post by Dave on 02/01/18 at 05:04:35

I am really sure I couldn't do it.....I have a hard time keeping the lines straight when I mow the grass.

Title: Re: How do you figure out this is something you ca
Post by justin_o_guy2 on 02/01/18 at 07:54:42

http://https://www.bing.com/images/searchview=detailV2&ccid=IXpqzZZL&id=4F96F12E4D4E306A919A86F22A7D516D99AA0C6C&thid=OIP.IXpqzZZLVj_AH-5ZwtyCswEsDd&q=ballpark+grass+designs&simid=608009496787944212&selectedIndex=2&qpvt=ballpark+grass+desig

I Tried to put a picture of some ballpark grass patterns.

ballpark grass designs

Dave, maybe you should modify the mower to be GPS operated.

Title: Re: How do you figure out this is something you ca
Post by FormerlyLostArtist on 02/02/18 at 13:55:16

that's pretty neat!