SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> What are you using for extended cables ?
/cgi-bin/YaBB.pl?num=1513736016

Message started by RazBarlow on 12/19/17 at 18:13:32

Title: What are you using for extended cables ?
Post by RazBarlow on 12/19/17 at 18:13:32

when using taller bars what are you all using for cables ?
Thanks

Title: Re: What are you using for extended cables ?
Post by Armen on 12/19/17 at 18:20:51

Last throttle cables I did, I bought the Motion Pro kit. Cut to fit, solder on new ends.
Lots of kits out there.

Title: Re: What are you using for extended cables ?
Post by Ruttly on 12/19/17 at 20:36:31

Lancer may be able to help , ask him !

Title: Re: What are you using for extended cables ?
Post by ohiomoto on 12/20/17 at 06:03:50

Liking that HD tank on there. Nice.

Title: Re: What are you using for extended cables ?
Post by smokin_blue on 12/22/17 at 11:32:19

I use Motion Pro for all my custom cables. work with them and they can make you just about anything you need.

Title: Re: What are you using for extended cables ?
Post by RazBarlow on 12/22/17 at 12:10:43

I was hoping that someone has found an on the shelf cross for extended cables .
Guess not

Title: Re: What are you using for extended cables ?
Post by Dave on 12/28/17 at 04:08:10

6D5E455D5E4D5350483F0 wrote:

I was hoping that someone has found an on the shelf cross for extended cables .
Guess not

The Savage is not sold in very larger numbers, and most companies can't justify the cost of making specialty products for it - they would never sell enough to justify the cost of designing/building/stocking the specialty part.

You are either going to have to order your own cables from Motion-Pro....or you can build your own using the Venhil kits. The only hard part of using the Venhil kits is learning how to solder without scorching the small diameter cables - it takes very little heat. It also takes the proper flux for steel - the flux used for plumbing or electrical is not correct. You can buy the hydraulic brake lines in whatever color and length you want, then build the clutch and throttle cables. You may also need to lengthen your electric wiring.

http://www.venhillusa.com/products.html

Title: Re: What are you using for extended cables ?
Post by Eegore on 12/28/17 at 08:13:39

Every motorcycle shop Ive been to makes custom cable lengths. The last one I had made I wasn't even charged for, so I imagine the cost for them to do it must be low.

I'd ask around once you have a length finalized.

Title: Re: What are you using for extended cables ?
Post by justin_o_guy2 on 12/28/17 at 11:02:51

59797B736E791C0 wrote:

Now we know she's cute..