SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Need some numbers /cgi-bin/YaBB.pl?num=1512414649 Message started by batman on 12/04/17 at 11:10:49 |
Title: Need some numbers Post by batman on 12/04/17 at 11:10:49 I don't have a newer Clymer 's ,Could someone look in the end of chapter 4 and post the range of the cam lobe height for intake and exhaust for the 96 or newer bikes ? thanks! |
Title: Re: Need some numbers Post by Gary_in_NJ on 12/04/17 at 11:15:09 Here ya go... This is from the 1986-2004 Clymer Manual, third edition printed 2005. |
Title: Re: Need some numbers Post by Christof13T on 12/04/17 at 18:16:08 2015 edition is exactly the same. no changes from the table Gary posted. |
Title: Re: Need some numbers Post by batman on 12/04/17 at 20:51:20 Thank you both! I have "the joker" Clymer's printed in 1990 which states that it covers years1986-1988 .I've spent 23 years looking for the 88 without much luck! (I'm not that worldly) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |