SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Looking for a lead on 3" diameter stem mirrors
/cgi-bin/YaBB.pl?num=1512371209

Message started by IslandRoad on 12/03/17 at 23:06:49

Title: Looking for a lead on 3" diameter stem mirrors
Post by IslandRoad on 12/03/17 at 23:06:49

Hey guys, can anyone point me to somewhere that sells stem mirrors with 3" diameter glass? 10mm thread would be great, but there are adapters for 8mm thread.

I've got some Superbars on the way and would like to put a stem mirror on the right (we ride on the left here) and a bar-end mirror on the left (I've already got that). I've looked all over the interwebs and can only find 4" mirrors, used on scooters and old Hondas - I bought a cheap pair to try them out but they're too big for the look I'm going for! I'm not looking for the cheapest, just the right look.

Any help would be much appreciated.

Title: Re: Looking for a lead on 3" diameter stem mirrors
Post by batman on 12/04/17 at 07:11:12

I'd stay away from Yamaha mirrors as I believe they run both left and right handed threads on the base of their mirror stems.

Title: Re: Looking for a lead on 3" diameter stem mirrors
Post by IslandRoad on 12/04/17 at 07:33:16

5A594C5559560C00380 wrote:

I'd stay away from Yamaha mirrors as I believe they run both left and right handed threads on the base of their mirror stems.

Thanks for the heads-up!

Title: Re: Looking for a lead on 3" diameter stem mirrors
Post by IslandRoad on 12/05/17 at 00:00:59

Well, after much late night searching, I have one of these arriving on Friday.

https://www.ebay.com.au/itm/Chrome-Black-Universal-Cafe-Racer-Vintage-Motorcycle-Round-Side-Rear-View-Mirror/232240695104?ssPageName=STRK%3AMEBIDX%3AIT&var=531460975267&_trksid=p2055119.m1438.l2649