SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Bar Buzz Kill /cgi-bin/YaBB.pl?num=1498630867 Message started by cygnet on 06/27/17 at 23:21:07 |
Title: Bar Buzz Kill Post by cygnet on 06/27/17 at 23:21:07 Has anyone used this stuff? Just might help smooth out thumpy. http://www.barbuzzkill.com/default.asp?sec_id=180003901 |
Title: Re: Bar Buzz Kill Post by LANCER on 06/28/17 at 01:03:31 Sounds interesting. |
Title: Re: Bar Buzz Kill Post by Dave on 06/28/17 at 01:50:31 Before you buy this to put in your stock handlebars - you should be aware that the stock handlebars have steel weights welded into the ends. These weights are solid and don't have a hole in the end - so unless you drill a hole in the center of the weight you won't be able to install anything in the handlebars. The weights is really long - it would not be easy to drill all the way through it. |
Title: Re: Bar Buzz Kill Post by cygnet on 06/28/17 at 10:17:22 I knew that there were bar end weights I didn't know that they were welded in. Some guys drill a hole in the middle of the bars and put stuff in that way ,but I don't like that idea. Going to have to think about this. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |