SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front peg removal /cgi-bin/YaBB.pl?num=1498011243 Message started by Danmiller369 on 06/20/17 at 19:14:03 |
Title: Front peg removal Post by Danmiller369 on 06/20/17 at 19:14:03 1997 ls650 New to me bike that the previous owner really abused. I believe the bike was layer down on both sides because both footpegs are broke off. I order some HD pegs but when I went to install, it appears the pegs are either pressed in or the bolt head that holds in the peg does not have a slot for a driver....how is this removed? |
Title: Re: Front peg removal Post by verslagen1 on 06/20/17 at 19:20:53 There's a plastic cap pushed in an allen head bolt. You gotta pry out the cap. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |