SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Wire gauge
/cgi-bin/YaBB.pl?num=1494789682

Message started by BSTON on 05/14/17 at 12:21:22

Title: Wire gauge
Post by BSTON on 05/14/17 at 12:21:22

Does anyone know what gauge the stock wires for the tail light and rear turn signals? This is for an 03 if it makes a difference.

Title: Re: Wire gauge
Post by Kenny G on 05/14/17 at 12:37:56

Bston,

When I rewired my tail light and turn signals I used 18 AWG. If you check it with a wire gauge you will probably find that the wire is 20 or 22 AWG.

I always use wire with white insulation and then use shrink tubing in various colors to color code the connections....

Wait until someone else pipes in before you purchase the wire, to make sure the slightly heavier wire will not hurt anything.

Kenny

Title: Re: Wire gauge
Post by Ruttly on 05/14/17 at 15:18:22

18 gauge is fine for the lighting except headlight

Title: Re: Wire gauge
Post by BSTON on 05/14/17 at 15:45:44

I'm not replacing any wiring. The Ryca kit uses 6 (I think) individual connectors for the tail light and turn signals. I want to just replace that with an automotive style clip and I want to make sure I'm getting the right size.

Title: Re: Wire gauge
Post by batman on 05/15/17 at 21:43:00

Ruttly 's right 18ga !