SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Clearances inside the clutch cover /cgi-bin/YaBB.pl?num=1493656579 Message started by kojones on 05/01/17 at 09:36:19 |
Title: Clearances inside the clutch cover Post by kojones on 05/01/17 at 09:36:19 I have some marks inside my Savages clutch cover, seems like the tensioner is hitting the cover and making noise, too. Measured 11mm from the gasket surface to the marks. https://www.dropbox.com/s/z35l1jgbhddlgtk/2017-05-01%2017.57.08.jpg?dl=0 https://www.dropbox.com/s/ti613aal54fbs5j/2017-05-01%2017.41.10.jpg?dl=0 Similar experiences or anybody has a cover that could be measured? |
Title: Re: Clearances inside the clutch cover Post by kojones on 05/01/17 at 11:08:24 Just asking this because my cover has been welded and I don't know if it's been modified more shallow, would really appreciate if someone who has a cover could measure the clearance between the gasket surface and the oil passages behind the filter. If it's the cover causing the hitting, I'll buy a used one. If it's not, then I guess I have to bent the chain guide or something. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |