SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> Savage bobber /cgi-bin/YaBB.pl?num=1491478584 Message started by gards57 on 04/06/17 at 04:36:24 |
Title: Savage bobber Post by gards57 on 04/06/17 at 04:36:24 Hi all, does anyone have any experience of replacing the savage front wheel for a smaller one?? Thanks :) |
Title: Re: Savage bobber Post by Dave on 04/06/17 at 05:08:13 There are a few of us that have replaced the front rim with an 18" rim, and we use the stock hub/brake assembly. This simplifies the brake issue, as all the stock parts work. This isn't always cheap however, as spoke sets are about $100, rims can be $ 100-$200, and if you can't lace and true a wheel yourself, the labor is around $100 to pay someone else to do it (and shipping if you have to mail the wheel to have it built). The easiest change for you would be to install a 90/90-19 front tire, as that will be a tire that has less height. http://www.bikebandit.com/tires-tubes/90-90-19-street-motorcycle-tires/t11lr4cd Going to a different front wheel assembly is more complicated, as you can get into axle size, wheel spacer size, and brake issues. And it is possible to install a front wheel without any brake, and this was common for the old school choppers - but that really doesn't make a motorcycle that is safe to ride as the rear wheel provides very poor braking when you need to stop in a hurry. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |