SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Front footpegs
/cgi-bin/YaBB.pl?num=1488834729

Message started by sanodusa on 03/06/17 at 13:12:09

Title: Front footpegs
Post by sanodusa on 03/06/17 at 13:12:09

I just purchased an 02 Savage and have to replace the front pegs. I tried a rear peg to maybe use temporarily but the left side one goes downward with pressure on it. Can anyone help.

Title: Re: Front footpegs
Post by verslagen1 on 03/06/17 at 13:59:51

Shouldn't go down with pressure, did you install them upside down?

You can take apart the old front ones and abuse them to being straight again.

Title: Re: Front footpegs
Post by sanodusa on 03/06/17 at 14:22:11

The right side I can abuse it as you call it but the left side is broken. The previous owner made a rig up with the inner piece of the peg I'm assuming and rigged up a sportbike peg to it.

Title: Re: Front footpegs
Post by batman on 03/07/17 at 16:49:41

You might try looking in the marketplace.

Title: Re: Front footpegs
Post by Ed L. on 03/08/17 at 12:45:56

It's possible to get a generic Harley type foot peg and drill out the mounting hole so it fits the Savage through bolt. I was able to do it to a cheap set I picked up used after buggering up the stock set on my '02.

Title: Re: Front footpegs
Post by ohiomoto on 03/10/17 at 05:20:49

I may have a set for sale soon. I should be starting my mid controls here shortly.

Title: Re: Front footpegs
Post by sanodusa on 03/11/17 at 10:52:44

Thanks ohiomoto I may take you up on the offer if I can't find anything. The harley peg thing is what I was thinking at first but am leary about it wanting to go downward. My thinking right now is cutting some 1/2 inch square tubing 6 inches long and drilling a whole through it. I think it would work perfectly fine what do ya'll think?