SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Helmet lock relocation
/cgi-bin/YaBB.pl?num=1487832218

Message started by T140V on 02/22/17 at 22:43:37

Title: Helmet lock relocation
Post by T140V on 02/22/17 at 22:43:37

After relocating my turn signals due to saddle bag installation I wanted to make a helmet lock that was out of the way of heat or paint. That being said I chose the handle bars. I made one of these for my Triumph but the S40 bars are different. Here is a pic to start with. It looks like a handlebar weight.

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 22:45:16

Next pic shows the key installed

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 22:46:21

The locking pin pops out

Title: Re: Helmet lock relocation
Post by Kenny G on 02/22/17 at 22:49:21

T140,

Please post a pic with your helmet locked in place.

Kenny G
:-/

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 23:03:11

Something locked up. To big of a pic. I'll try again. I place the d ring into the slot underneath then push it back in and the helmet hangs without touching the tank

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 23:05:20

Here are what the bars look like now

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 23:12:26

I'll try this closeup again of the d-ring in the slot with the pin pushed in

Title: Re: Helmet lock relocation
Post by T140V on 02/22/17 at 23:17:10


022C270A3B283A21490 wrote:
T140,

Please post a pic with your helmet locked in place.

Kenny G
:-/

It's now the last pic Kenny G :)

Title: Re: Helmet lock relocation
Post by batman on 02/22/17 at 23:30:37

You made these or did you buy? they look great!

Title: Re: Helmet lock relocation
Post by T140V on 02/23/17 at 01:43:14

I made them in my garage. It's all about customizing in a small way. :)

Title: Re: Helmet lock relocation
Post by batman on 02/23/17 at 16:18:16

You could sell a few in the market place! I know I'd be interested.

Title: Re: Helmet lock relocation
Post by justin_o_guy2 on 02/23/17 at 16:31:26

I got a flexible, rubber coated loop lock for a gun. Goes around the handlebars and the chin guard.
The OEM setup is an invitation for some jakkass to dump a coke in my helmet.

Title: Re: Helmet lock relocation
Post by T140V on 02/23/17 at 23:45:12

I've never had that happen but I put my gloves in the helmet just in case. I figure it's better than just hanging it on the mirror. It keeps the honest people honest.

Title: Re: Helmet lock relocation
Post by IslandRoad on 02/24/17 at 01:58:04

Make some more, and just take my money already!

Title: Re: Helmet lock relocation
Post by T140V on 02/25/17 at 07:39:52


576D727F707A4C717F7A1E0 wrote:
Make some more, and just take my money already!

If you pay for my plane ticket I'll even install it for you mate! ;D I'd like another trip down under.

Title: Re: Helmet lock relocation
Post by IslandRoad on 02/26/17 at 00:26:54

I had look online ... apparently the planes aren't running that day! [ch128526]

Title: Re: Helmet lock relocation
Post by T140V on 02/26/17 at 03:08:42


0B312E232C26102D2326420 wrote:
I had look online ... apparently the planes aren't running that day! [ch128526]

To bad and my Cessna can't make it that far :'(

Title: Re: Helmet lock relocation
Post by justin_o_guy2 on 02/26/17 at 07:21:38

What kinda Cessna?

Title: Re: Helmet lock relocation
Post by T140V on 02/26/17 at 11:39:25


342B2D2A3730013101392B276C5E0 wrote:
What kinda Cessna?

It's a modified Cessna 172B  180hp with a constant speed prop. It was either buy a pickup truck or that. Actually the plane was cheaper.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.