SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Finally got the Dyna on.
/cgi-bin/YaBB.pl?num=1487239857

Message started by eau de sauvage on 02/16/17 at 02:10:57

Title: Finally got the Dyna on.
Post by eau de sauvage on 02/16/17 at 02:10:57

It's Dynamite. Local muffler chaps did a superlative job, I am well chuffed, $100 AUD, (70 USD) Which is what the Ryca exhaust adapter would cost me delivered to Australia!

Sounds freaking awesome, much much better than I expected. I installed a 150 main jet and as the plastic washer was only 2.5mm thick instead of filing it down, I moved the clip position one notch down because the notches are only 1mm apart so moving it one notch down was like taking 40% off the thickness of the washer. Maybe the US spacers are thicker, I've heard they are 5mm.

I also found the plastic tube in the diaphragm spring like IslandRoad, so I turfed that.

Haven't had a chance to take it for a big ride yet, will go out tomorrow, but so far it seems pretty good. Could be a bit of a problem with speeding fines because it's difficult not to crack it open it sounds so good.

The old muffler sounded like my Bernina 730 Record sewing machine, which is good for a sewing machine but nicht so gut for a motor sickle. Now it actually sounds like the genuine article.

http://https://s24.postimg.org/eifdz0fm9/IMG_0533.jpg (https://postimg.org/image/eifdz0fm9/)

http://https://s24.postimg.org/ig7925rtd/IMG_0534.jpg (https://postimg.org/image/ig7925rtd/)

http://https://s24.postimg.org/s20tigiz5/IMG_0535.jpg (https://postimg.org/image/s20tigiz5/)

http://https://s24.postimg.org/ygzuf4pox/IMG_0536.jpg (https://postimg.org/image/ygzuf4pox/)

http://https://s24.postimg.org/cj3dlcaoh/IMG_0537.jpg (https://postimg.org/image/cj3dlcaoh/)

http://https://s15.postimg.org/58hikgfqv/IMG_0541.jpg (https://postimg.org/image/58hikgfqv/)

Title: Re: Finally got the Dyna on.
Post by IslandRoad on 02/16/17 at 03:00:29

Hey Eau, yeah I know what you mean about the sound! It's pretty cool.

And as for that plastic tube, just wait until you can open the bike up on an open back road :)

I'll put a topic in the tech section soon for "Suzuki S40 (Australia) - removing the rev limiter" ;)

Title: Re: Finally got the Dyna on.
Post by batman on 02/16/17 at 08:50:16

Nice to see you "down under "guys coming "UP " in the world ! :) :) :)