SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Machine screw size. /cgi-bin/YaBB.pl?num=1487127094 Message started by Papa Bear on 02/14/17 at 18:51:34 |
Title: Machine screw size. Post by Papa Bear on 02/14/17 at 18:51:34 On my 2011, the pillion seat backrest is held on by 2 Phillips head machine screws in the back. Does anyone know what metric size/pitch they are? I got one of these back bags and I'd like to mount it using longer backrest screws if I knew the size. https://www.amazon.com/gp/product/B01MY2949J/ref=od_aui_detailpages00?ie=UTF8&psc=1 Thanks in advance. Bob |
Title: Re: Machine screw size. Post by batman on 02/15/17 at 19:50:46 PB take the screw to the store ,hit the metrics find a screw the same diameter ,hold the threads together ,if you don't see any light ,try a nut on each ,if it fits ,buy the length you need,or you could buy a thread pitch gauge. |
Title: Re: Machine screw size. Post by Tocsik on 02/16/17 at 06:16:34 the Ace hardware stores have SAE and metric test stations to determine the size and thread pitch of stuff you bring in. Basically threaded studs and nuts mounted on a board. Ace also has the best selection of fasteners; at least in my area. |
Title: Re: Machine screw size. Post by Papa Bear on 02/16/17 at 11:40:20 I have had a heck of a time getting metric fasteners in my town. I was at a meeting in another town this morning and went to their lumber centre which has one of those boards with SAE/Metric bolts/nuts. The fastener I needed is a M5 .08 thread so I purchased 2 longer bolts with washers and came home to mount my new rear bag. I think it turned out quite well. Solid as a rock and lookin' good. 8-) http://i52.photobucket.com/albums/g35/bobistheoilguy/S40-bag3s.jpg (http://s52.photobucket.com/user/bobistheoilguy/media/S40-bag3s.jpg.html) http://i52.photobucket.com/albums/g35/bobistheoilguy/S40-bag2s.jpg (http://s52.photobucket.com/user/bobistheoilguy/media/S40-bag2s.jpg.html) |
Title: Re: Machine screw size. Post by piedmontbuckeye on 02/17/17 at 13:09:53 6F6E61606362656467560 wrote:
Be sure to check out McMaster-Carr - it has everything!! And . . . the online connection (mcarr.com) is a very easy to maneuver source to find literally most anything you want! Also, very reliable and trustworthy. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |