SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Finding TDC /cgi-bin/YaBB.pl?num=1482560711 Message started by jasonleung on 12/23/16 at 22:25:11 |
Title: Finding TDC Post by jasonleung on 12/23/16 at 22:25:11 i'm about to start taking apart the cylinder but i didnt realize i'm supposed to find tdc before removing. How in the world do i do that please help. :-/ pictures would be great too :) |
Title: Re: Finding TDC Post by verslagen1 on 12/23/16 at 23:03:03 finding tdc before removing is so the rockers don't force the cover off in case you have 1 bolt in a corner that may bend the cover. now that you have it off, just check the flatness of the mating surface. and I hope you'll review the how-to's in the tech section before you try to assemble. |
Title: Re: Finding TDC Post by Kenny G on 12/23/16 at 23:08:47 Jason, Serowbot has something in the Technical Documents about finding TDC. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1278347767/0#0 Kenny G |
Title: Re: Finding TDC Post by jasonleung on 12/24/16 at 17:08:55 thanks to the both of you the forum on how to find tdc really helped alot |
Title: Re: Finding TDC Post by justin_o_guy2 on 12/24/16 at 19:59:58 If you have to pry the top off, you missed a bolt. Go ahead, ask me how I know. |
Title: Re: Finding TDC Post by batman on 12/24/16 at 21:27:35 They're usually the two bolts just inside the covers you take off for valve adjustment. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |