SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Just what is this stock carburetor anyway ? /cgi-bin/YaBB.pl?num=1482355738 Message started by Cobalt95 on 12/21/16 at 13:28:58 |
Title: Just what is this stock carburetor anyway ? Post by Cobalt95 on 12/21/16 at 13:28:58 I have a 1996 LS650, It has a Mikuni carb, but I'll be danged if I can find out what model/size it is. I'm also looking for an intake flanges with 90 degree bend, do they exist ? Thanks ! 8-) |
Title: Re: Just what is this stock carburetor anyway ? Post by norm92de on 12/21/16 at 13:47:02 Cobalt95, According to the Suzuki manual the carb is a Mikuni BS40SS 24C4. Main jet 145, pilot jet 52.5, and the pilot jet 1 and 1/8 turns out. It will if it is standard have a plastic washer on top of the needle .110" thick. Hope this helps. I have the manual handy if you need any more specs. |
Title: Re: Just what is this stock carburetor anyway ? Post by Dave on 12/21/16 at 13:57:42 567A777479612C20150 wrote:
You trying to get even less HP from the engine? :-? |
Title: Re: Just what is this stock carburetor anyway ? Post by verslagen1 on 12/21/16 at 15:07:58 If you really want that, best way is to look thru fleabay for possibles. some v twins have dual carbs that 1 or the other will have a 90ish bend. http://www.ebay.com/itm/97-04-SUZUKI-MARAUDER-800-VZ800-MANIFOLD-INTAKE-BOOTS-CARBURATOR-CARB-/401223144029?hash=item5d6ac3525d:g:ayMAAOSw5cNYI41c&vxp=mtr I don't think this ones big enough since it's a 800 |
Title: Re: Just what is this stock carburetor anyway ? Post by LANCER on 12/21/16 at 16:57:45 I've not seen an angled carb mount produced anywhere for this bike. I am working on one that will be made of aluminum and have a 45 degree angle. There should be a prototype shortly. |
Title: Re: Just what is this stock carburetor anyway ? Post by Kris01 on 12/21/16 at 19:52:04 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1309246277 Read and learn. ;) |
Title: Re: Just what is this stock carburetor anyway ? Post by Ruttly on 12/21/16 at 20:05:14 I have seen the 90ed intake ,they are one off custom made ! |
Title: Re: Just what is this stock carburetor anyway ? Post by Ruttly on 12/21/16 at 20:10:23 Dave , While the 90 isn't exactly a performance thing , but a greater distance between slide & valve gives mixture more time to atomize,speed up & straighten out ! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |