SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Length of new Cam Chain - OEM
/cgi-bin/YaBB.pl?num=1481018398

Message started by youzguyz on 12/06/16 at 01:59:58

Title: Length of new Cam Chain - OEM
Post by youzguyz on 12/06/16 at 01:59:58

Does anybody out there have a NEW OEM Cam Chain.
One they got from Ron Ayers or Bike Bandit or some other place that sell true OEM Suzuki parts.

If so, could you please measure the distance between 20 pins on the chain?
Lay it down on a piece of paper. Put a line where a pin is. Count 20 pins, put another line.. measure

Thanks!

Yes, I did some research before I posted. I saw a post by verslagen that the new length should be 127mm.
I would just like to get a verification.

Title: Re: Length of new Cam Chain - OEM
Post by Dave on 12/06/16 at 04:27:03

I don't have a new OEM chain - but I found this thread.

It says the distance for 21 pins is 127mm on a new chain. (Not 20 pins).

http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1168881604

Title: Re: Length of new Cam Chain - OEM
Post by youzguyz on 12/06/16 at 04:47:55

78434E5948445F59424A47582B0 wrote:

The specs in Clymers are for "20 pitch length". So, yes, 21 pins.
My "20" come from "20 pins away", which is 21 pins end to end.
Sorry about the confusion..

And, thanks for the link!