SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Fake Oil Tank /cgi-bin/YaBB.pl?num=1474695450 Message started by troyrr on 09/23/16 at 22:37:30

Title: Fake Oil Tank Post by troyrr on 09/23/16 at 22:37:30 Does anyone have any tips for installing a Faux Oil Tank/Electronics Box?

Title: Re: Fake Oil Tank Post by Ruttly on 09/24/16 at 06:49:09 Ryca uses a fake oil tank on their bobber. Check the website go to bottom of home page & click on resources, maybe one of the bobber videos shows how they mount it ! Good Luck !

Title: Re: Fake Oil Tank Post by batman on 09/26/16 at 20:46:58 I always thought that if I were to make one I'd use PVC pipe .Two pieces ,one cut  short for the outside ,and both cut down the side to remove a section for access ,the shorter one slid over the longer  ,which would have end caps then glued in place,the shorter piece could then be rotated ,much like opening a rolltop desk. Light weight,and with a light sanding paintable.Wires could be fed in from the bottom and simply sealed with silicon ,no danger of contact with a metal tank .

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.