SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> engine removal /cgi-bin/YaBB.pl?num=1472471391 Message started by nablats on 08/29/16 at 04:49:51 |
Title: engine removal Post by nablats on 08/29/16 at 04:49:51 heyup from Yorkshire again, I have my engine loose of all bolts etc, removal seems to be hindered by the battery box mounting brackets preventing lifting of said lump. I have no `helpers` with this lifting, is it necessary to remove swingarm pivot so bracket can be removed? |
Title: Re: engine removal Post by Dave on 08/29/16 at 04:56:06 The battery box/engine mounts are removable....you have to unbolt those from the frame to provide clearance (that is why they are removable). ;) |
Title: Re: engine removal Post by justin_o_guy2 on 08/29/16 at 05:28:53 Some people have laid the bike over, removed the last bolts,, picked up the frame. |
Title: Re: engine removal Post by Ruttly on 08/29/16 at 20:38:40 I use a 4 or 5" piece of pcv pipe and rope, put rope thru pipe and thru hole where you removed the top rear engine mounting bolt and tie a good knot take engine out of rightside. Use the handle and grab at base of cylinder with the other hand. I put a plastic milk crate next to bike so once it's out set it on the milk crate, rest a minute,now move it to the work bench. Done |
Title: Re: engine removal Post by kojones on 08/29/16 at 21:12:23 The engine will have enough clearance to be lifted off with only one of the brackets removed. To be lifted back on the second one had to be removed too. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |