SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Exhaust?
/cgi-bin/YaBB.pl?num=1470626572

Message started by Thebombkc12 on 08/07/16 at 20:22:52

Title: Exhaust?
Post by Thebombkc12 on 08/07/16 at 20:22:52

Looking for loud performance pipes. Just took off the worst slip
On job of my life and now bike has straight pipe. It's loud as balls and I like it but don't want to mess up the carb. Best recommended quick and permanent fix. Saw forum for Harley dyna swap. But those are stock pipes arnt they? I want it mean and loud.

Title: Re: Exhaust?
Post by Kris01 on 08/07/16 at 20:48:08

90% of us (or more) use a Dyna. It's loud enough for me.

Title: Re: Exhaust?
Post by justin_o_guy2 on 08/07/16 at 22:50:04

The louder it is the meaner it is to get it jetted right. Performance suffers from too little back pressure. The Dyna is agood comprise. There's a small,loud,Emgo, but the jetting/power, I don't know about. I think Dave might.

Title: Re: Exhaust?
Post by Blade on 08/08/16 at 01:30:31

Previous owner fitted an Enfield long bottle - it has a Harley-esque note.

Title: Re: Exhaust?
Post by gizzo on 08/08/16 at 03:35:15

The Emgo ones are ear splittingly loud. I had to make a proper bafle for mine.

Title: Re: Exhaust?
Post by Dave on 08/08/16 at 04:10:08

774B46414C4E4148401211230 wrote:

I want it mean and loud.

I'm sorry, I don't support that form of rude behavior.

Last week we were eating at a restaurant in Covington, KY that had outdoor seating (Molly Malone's). It was a nice summer evening, and we were having a nice dinner and visit with my uncle. A dude on a Harley with open pipes came by, and found the need to open the throttle and impress us with his obnoxiously loud pipes.....it was ear splitting when you are seated 10 feet from the street. Everyone seated outdoors was subject to this childish behavior, and the jerk on the motorcycle somehow found pleasure by doing this?
:-?

This is the kind of behavior that gets motorcycles banned from camp grounds, condominium associations, public parks, etc.

Title: Re: Exhaust?
Post by Riley on 08/08/16 at 08:34:34

I have a 2.5 inch slip on over my header pipe. I had a plate welded onto the end of the header then drilled it to 3/4 of an inch. This gives it perfect back-pressure and also kills the noise some. I need no muffler and the bike looks and sounds much better. Not to mention it is cheap.

Title: Re: Exhaust?
Post by Kris01 on 08/08/16 at 19:24:43

Open pipe with a single homemade "baffle"? Got a video?